Photo Contest 3 Winners

We've Chosen Our Winners!

We received so many incredible photo submissions, it was tough to pick the winners! Amazing shots of tree care, facility maintenance, glass cleaning, and more from all over the USA, featuring several different models of CMC tracked aerial lifts. After long and careful consideration, we narrowed it down to the three winners:  

1st Place: Tim's Tree Care

Tim Bennett of Tim’s Tree Care in King of Prussia, PA, sent in some incredible shots of their CMC 83HD+ Arbor Pro. We chose this as the top submission for several reasons. Congratulations, Tim!

1) Impressive view: the operator’s point-of-view from the platform station is always a great perspective of a working job site.
2) High quality image: 
the photo was sent with high resolution, clarity, the lift was in focus, nothing was over/under exposed, and the image wasn’t manipulated or edited prior to being sent.
3) Tells a story: it’s clear this was residential tree work. The image shows that the lift was able to drive into the home owner’s backyard and setup next to their pool in tight quarters, and safely perform tree work.

2nd Place: All American Tree Service

David Litz of All American Tree Service in South Lyon, MI, submitted some great photos of their CMC 83HD+ Arbor Pro working. Our favorite among their submissions was this one of the lift set up in a backyard on two different levels.

1) Impressive job site: One of the most important values of a CMC tracked aerial lift is that it gets you into areas that have been previously impossible or inaccessible. This image shows the lift using its full potential, being setup on two different ground levels, and also showcases the extreme vertical up & over reach.
2) High quality image: the photo was sent with high resolution, clarity, the lift was in focus, nothing was over/under exposed, and the image wasn’t manipulated or edited prior to being sent.
3) Proper PPE & safe practices: basket operator is wearing all proper PPE (helmet & harness), and the lift is properly & safely setup on the terrain.

3rd Place: Slaymaker Group

Phil Slaymaker of Slaymaker Group in Washington Boro, PA, submitted this photo that stood out for capturing his CMC 60HD+ going through a narrow gate, as well as up & over some stairs with the help of some heavy duty aluminum ramps.

1) Impressive job site & tells a story: the access to this job site is extremely restrictive, but with the CMC 60HD+ they were able to access this job site where many other conventional lifts could never perform. In addition, the setup area where the outriggers are deployed is extremely compact, showing that having a narrow footprint is essential to difficult access job sites.
2) High quality image: the photo was sent with high resolution, clarity, the lift was in focus, nothing was over/under exposed, and the image wasn’t manipulated or edited prior to being sent.

Thank you to all who participated!

This was a fantastic photo contest. We have received many pictures, and they were even better than the last contest. We’re excited for the next one!

Here are a few things to consider for the next contest:

  1. Is my image high quality? (high resolution, not edited, no dark shadows, focused. If you zoom in, is it clear?)
  2. Are the personnel in the photo wearing proper safety gear?
  3. Ask us if you have questions! (

Honorable Mentions

J&F Tree Service

Can’t beat that view, featuring their CMC 83HD+ Arbor Pro!

Bee and Bee Tree Service

Full send with their CMC 60HD+ Arbor Pro!

Parshall Tree Service

A mirror image with their two CMC 83HD+ Arbor Pro’s.

All Other Submissions

HUGE Convention


Come check us out during a live virtual event! We will go LIVE on YouTube on August 28th at 10am & 1pm.

In our live events, we will be giving an introduction to our CMC Tracked Aerial Lifts, and how they help increase productivity and accessibility for power washing and window cleaning. We will be showing our F-Series lifts; demonstrating operation and doing a Q&A!

Can’t make our live event? No worries! Everything will be available to watch on our YouTube channel!

Watch our 10am video here

Watch our 1pm video here

Photo Contest 3

Let's See Your Lift In Action!

Time to ELEVATE your photo game to NEW HEIGHTS! Enter for a chance to win a DJI Mavic Mini Drone or a GoPro! We at All Access Equipment want to wrap up the summer season by holding our third photo contest. We would like to thank you again for choosing All Access Equipment to provide you with a tracked aerial lift to help you work faster & safer.

We want to see the best photos you have taken throughout this year, and we will pick three winners who will receive a gift!

*Please no resubmissions from previous years.

1st Place: DJI Mavic Mini Drone ($400 Value)

2nd Place: GoPro Hero 7 in Silver ($170 Value)

3rd Place: $100 Visa Gift Card

All Winners Will Also Receive an All Access Equipment Hat & T-shirt!

Winning photos will be prominently displayed on our website, and possibly on social media and advertising! 


  • Your picture should tell a “story”. Take a picture of your lift doing tree work, but also include the surroundings, showing the lift set up around trees, homes, etc. Some of the most unique photos are the ones that show the “difficulty” of accessing sites.
  • Take multiple pictures of the lift entering a difficult site and others showing the lift working.
  • Try to avoid over/under exposing the photos.
  • Take pictures when there is sufficient daylight.
  • Use the highest quality camera you can for the best results.
  • Try to avoid any unnecessary editing and avoid photo filters. 
  • Feel free to use a drone or any camera alternative if you have one. 
  • Be creative, have fun, and be safe!
  • Anybody working AND in the picture MUST be wearing PPE. Picture will be immediately disqualified if PPE is not worn.
  • Submit full resolution photos to below by August 31st.
Click or drag a file to this area to upload.

*By submitting a photo you are agreeing to the All Access Equipment terms and conditions* 

Terms and conditions: You grant us, without any compensation of any kind to you or others, the exclusive right and license to use, copy, distribute, display, publish, perform, sell, sublicense, modify, edit, adapt, translate, transmit, create derivative works from, and otherwise exploit all Images in any form, medium or technology that we elect, whether now or in the future. Without limiting the foregoing, you agree that, without further approval from you, we may exercise the rights you grant us herein for any and all purposes we deem appropriate, including, without limitation, for the promotion, marketing, and publicizing of our services and products. We may, for example, use and publish the Images on our website or third party websites, in our print, broadcast and digital advertisements, in our marketing materials, and in connection with our promotional events. The right and license you grant us is perpetual, irrevocable, exclusive, royalty-free, unrestricted, worldwide, and transferable without your further consent. You understand and agree that we have the option, but not the obligation, to use the Image you submit to us, and that if we exercise our license rights, we may also use your User Information in conjunction with such Images

Expanding Our Dealer Network


New and Existing Dealers

Although we’re located in Massachusetts, we have authorized dealers around the nation to help better serve our customers. Our official dealer partners are a great resource for you to schedule a demo nearest to your location, get certified service work, spare parts, and general assistance. We are constantly adding to our dealer network to continue to best serve you!

You can now find a CMC Tracked Aerial Lift located in Minnesota, Crete Illinois, Kent Ohio, Portland Oregon, Savannah Georgia, and Buffalo New York.


 Below, we have an updated list and map of our newest dealers, in addition as our existing dealers — WTD Equipment on the West Coast, and Tri County Services in Kent, OH.

Interested in becoming a dealer? Give us a call at (978) 712-4950.


A Top Notch Equipment Inc

14490 Northdale BLVD

Rogers, MN 55374


Part of GA / SC

Josh Walters

Savannah Equipment Specialists, LLC

411-B Telfair Road

Savannah, GA 31415


Illinois and Parts of Indiana

Dave Webb

Wellbuilt Equipment

25210 S State St,

Crete, IL 60417


New York

Skyworks Equipment Rental

100 Thielman Drive

Buffalo, NY 14206


Our Other Existing Dealers

Tri-County Service (Formerly Buckeye Equipment)

Greg Hards

1215 E Howe Rd

Kent, OH 44240


West Coast: CA, ID, WA, OR

WTD Equipment

Dave Geiger


COVID-19 Statement

An Important Message Regarding COVID-19

To our valued customers, 

We want to assure our customers that we are taking precautions to reduce exposure and risk caused by COVID-19. Our staff is following the CDC guidelines for hygiene and personal space. Our team is paying close attention to news updates and are adapting as necessary to ensure that we keep our team working for our customers. 

During times like these, we feel an overwhelming sense of responsibility toward our staff and customers. It’s a reminder that we’re all in this together! The health and safety of our employees and customers, along with continuing to provide a high level of service is a top priority for our team. Our teams are working hard to ensure uninterrupted quality service for you. While there may be some things we can’t do, we are here to assist in any way that will not put anyone in danger.  

Our sales team continues to be available to take calls and provide an in-person demonstration of our equipment. If you would prefer a video demonstration, we have many videos available for you to view on our YouTube site. Please reach out to our sales team at 978-712-4950 option 1 or by email at We also believe we have the largest inventory of lifts in-stock with the fastest availability in North America. Our growing network of stocking dealers is available with an inventory of new lifts and is available for service and parts support. 

Our parts team continues to take your calls, receive parts from our vendors, and ship them to our customers. We pride ourselves on having a large in-stock ready to ship inventory of parts, with availability to ship parts the same day. Please call our friendly parts team for parts you may need for regular maintenance. We have filters of all kinds in stock and UPS continues to pick up and deliver. The downtime caused by this crisis can make a great time to catch up on taking care of your equipment. 

Our service team is hard at work processing new equipment and servicing customer machines to our highest standard. To keep our technicians from having to travel, we are currently prioritizing in-house work over non-emergency road work. Our team can help you understand our work queue and travel availability. However, at the moment, we are being cautious with discretionary travel for safety reasons. We are happy to help point you to a local resource if one is available for your needs. We are currently accepting work in our workshop for regular maintenance, inspections, etc.

Our top-notch, in-person delivery and familiarization service continues to function as normal. We are working on alternative delivery & familiarization options for some customers. If this is a concern for you, please contact our delivery team at 978-712-4950 option 5. We now have several videos available for all of our customers, and if you’d like a refresher course on some functionality of your lift, contact us at and we’ll get you set up!

Our office staff is split between remote and in-office work based on need. All employees have been briefed on “stay-at-home” rules due to sickness or contact with someone known to have COVID-19. 

Thank you for your loyalty and understanding as we do our best to ensure your safety and the safety of our team. 


Ryan Polonski

CEO, All Access Equipment

ConExpo 2020 Feature

The 2020 ConExpo All Access Equipment & CMC Feature

At ConExpo, All Access Equipment will be continuing the launch of their new CMC F-Series lifts in 36 ft, 44 ft, and 54 ft platform height. These narrow access lifts are specifically designed to be the easiest and fastest lifts for use in the rental industry, construction, and facilities. Great for use in narrow, sloped, and other difficult locations, the CMC F-series lift can get places that a boom or trailer based lift cannot. CMC F-Series tracked lifts can multi-task in various work situations, replacing a number of other lifts with ONE versatile lift. The size, usability, and options of this new series of lift offers greater utilization and revenue generating opportunity!


All three sizes will enter any standard 36” door or gate. These lifts are lightweight and easy to move compared to boom lifts and have an extremely compact footprint. The F-Series features direct hydraulic controls & operation, gas, diesel, electric, and battery power options and will reduce your operational costs, providing the best ROI of any lift available today.

CMC 42F Rental Lift

Introducing: The NEW CMC F-Series

Introducing: The NEW CMC F-Series

CMC F-Series lifts are specifically designed to be the easiest and fastest lifts for use in the rental industry. Great for use in narrow, sloped, and other difficult locations, the CMC F-Series lift can get places that a boom or trailer-based lift cannot. Their low-cost and ease of operation ensures that your operational costs are kept low, providing the best ROI of any lift available today.

The F-Series features direct hydraulic controls & operation. They are powered by a variety of options such as Honda gas, plug-in electric, and lithium-ion battery power. This wide variety of options will let you choose the right system for your needs and budget.

Compact Width to Enter 36" Doors

The F-Series line by CMC have a compact width of 32″, allowing access through standard doorways and the ability to travel through narrow corridors.

Simple to Use Direct Hydraulic Controls

The controls on the F-Series are all direct hydraulics, allowing for simpler and more intuitive operation. 

120V Plug-in Electric Motor

The plug-in electric motor allows quieter operation and no engine fumes when working indoors.

Simple-to-Use Wired Remote Control

The connected remote makes driving your lift simple and easy to use.  

Powerful Track Drive System

The CMC F-Series features powerful track drive systems that expand and retract.

Honda GX390 Engine

The CMC F-Series comes equipped with a Honda GX390 gas engine. (Optional Honda iGX390 available)




(VIDEOS) The Arbor Pro Series

The Arbor Pro Series

The Arbor Pro Series by All Access Equipment was designed specifically for the tree care industry in America. All of our Arbor Pro tracked aerial lifts will enter 36″ gates, and come packaged with automatic leveling, wireless radio remote controls, extreme working height and side reach, all built in with a heavy duty and rugged construction to withstand rough everyday tree work.

Call us today at (978) 712-4950 Option 1 to speak with a Sales Associate and schedule a test demo! 

Top 10 Cold-Weather Working Tips

Top 10 Cold-Weather Working Tips

Working in cold weather presents it’s own unique set of challenges that might not normally occur in warmer weather. While our equipment & components are heavy duty and weather proof, following the tips below will lead to the best diesel engine and lift operation performance, maximize your up-time.

1 )  When working on sites with snow or ice on the ground, clear all snow and ice where outriggers will be set up. Outriggers MUST be set up on solid ground, free of snow and ice. 

– Clear site where outrigger pads land with a shovel so area is totally clean prior to setting up lift. 

– Stabilize & secure all outrigger pads with a larger ground pad or plywood in case of the ground freezing and/or thawing. 

– When working on a slope, be sure the ground where each outriggers lands is clear and secure. This is mandatory and the responsibility of the operator.

2 )  Replace Kubota engine fuel filter every time you perform engine oil changes.  

The fuel filter is the very first place fuel clogs happen. Without fuel flow, the engine will not work. Filters are inexpensive and can be quickly and easily replaced. Call (978) 712-4950 ext. 3 to order new fuel filters today!

(2019 83HD+ shown)

3 )  Replace hydraulic filters regularly. Clogged filters reduce hydraulic flow and slow down lift operation. This is especially important during cold weather. 

(2019 83HD+ shown)

4 )  Spray light lube on ALL microswitches on a weekly basis, especially the switches activated by outrigger lock pins. Light lube will prevent any moisture from freezing on microswitches.

(2019 83HD+ shown)

5 )  Turn key switch on to glow plug position prior to cranking the engine. Light will light up, then turn off when glow plugs are hot.  

Always utilize glow plugs to start Kubota engine during initial start up. Glow plugs are activated by turning ignition key to the first position. Hold key in this position until light turns off, then crank engine. In extremely cold weather, turn key off and hold key in GLOW PLUG position again. If Kubota diesel engine is already warm, glow plugs will not activate. This is normal.

(2019 72HD+ shown)

6 )  Always use a multi-grade quality engine oil such as 15W-40. For extremely cold temperatures, check Kubota engine owners manual for manufacturer’s instructions. 

(2019 83HD+ shown)

7 )  Always add a small amount of fuel conditioner when air temperatures drop below 35°. Gas stations and fuel suppliers do not replace Summer fuel with Winterized fuel until their Summer supplies are exhausted.  

Adding a few ounces of fuel conditioner and replacing the fuel filter greatly effect a diesel engine cold start. If you can’t get fuel to the engine, the engine will not start.

(2019 83HD+ shown)

8 )  Clean battery terminals: Shut off main battery disconnect switch, disconnect ground (-) cables first, then wire brush ALL terminals. Every connection should be “bright and shiny”. Use dielectric grease on all terminals, then securely re-attach cables.

On older machines, disconnect ground strap on frame, then use a grinder to clean ground strap contact area. You want to make sure it is free of paint, corrosion or rust. Wire brush strap end and bolt. Apply dielectric grease and tighten. Cover connection with dielectric grease.

9 )  Allow Kubota diesel engine to run for a few minutes prior to placing maximum load on engine. This allows engine oil to warm up and also hydraulic fluid to circulate and warm up.

10 )  Always clean snow and ice from machine prior to operating lift.

Following the steps above will save you a lot of time and greatly minimize problems. 

If you have further questions about maintenance, service intervals, or products we would recommend, please reach out to our Service Team at (781) 222-0096.

What Our Customers Say

What Our Customers Say

At the Tree Care Industry Show, we caught up with a few of our proud customers and here’s what they had to say about owning an All Access Equipment CMC Tracked Aerial Lift.

A BIG thank you to:

Benjamin Woodard, Woodman Tree Service
Braden Guenot, Tree Team Inc.
Carlos McClintock, Greater Pitt Tree Service
David Wells, Wells Tree & Landscape Inc.
Jared Baxter, Get-R-Cut
John Murphy, Artistic Tree & Landscape Creations
Josh Guin, Oakbros Tree Removal & Stump Grinding
Bill Seymour, Seymour Tree Service
Casey McCarty, The Tree Guy
Tony Wendland, Urban Tree Specialists
And all of our All Access Equipment customers around the country.
If you would like to share your own experience with your CMC Tracked Lift, give us a call as we would love to feature you and hear your story!